IMG_7422.jpg

Air temperature sensor DTE 75A

Non aspirated sensor designed to measure air temperature.

  • High accuracy

  • Excellent linearity

  • Radiation protected

  • Precipitation protected

  • Weatherproof connector

 

  • General
  • Technical data
  • Documents
  • Video
  • Images

DTE 75A is non aspirated sensor designed to measure air temperature. As a sensing element, thermolinear thermistor is used. It is protected by stainless steel cylinder that is thermally isolated from the case. Case is made of aluminium and UV resistant plastics protecting the sensing element from the sun and precipitation. On the bottom side of the sensor there is a mounting element and three pin waterproof connector to connect the sensor with the measuring system. Sensor has to be mounted upright and should be overvoltage protected. To provide connection between the sensor and the measuring system a two wire shielded cable should be used (Max. length can be up to several hundreds meters, depending on the wire resistance ).

Product references

Sensing element: Thermolinear thermistor YSI 44203
Measuring range: - 30 °C to + 50 °C
Accuracy: +/- 0.15 °C
Linearity: 0,15°C
Material: Stainless steel, aluminum and UV resistant plastics
Connection: 3 pin connector and 2 wire shielded cable
Dimensions: diam. 110 mm (4.33”) by 170 mm (6.7”)
Weight: 160g (0.35lb)

 

TitleDescriptionFilename
DTE 75A - Brochure DTE 75A - Brochure DTE_75A_Eng.pdf 

Product has no videos.

Air temperature sensor DTE 75A
DTE_75A.jpg